Function introduction: harmful gas control

Model: yh-jjd1200b

Parameters:

1. The controller is a 7-inch color touch screen, and the functional level is not lower than the three-level interface;

2. With SO2, formaldehyde, TVOC and PM2 5 air quality display;

3. Equipped with particle pre + Post purification device;

4. Equipped with active microbial purification device;

6. Lifting support with active microbial purification device;

7. The acid gas purification device is of M-type design, which reduces the air flow resistance and increases the gas purification energy;

8. The equipment has the function of nitrogen dioxide purification, and the efficiency shall be ≥ 99% (the test report issued by the national authority and stamped with the official seal of the manufacturer shall be provided on site)

9. The equipment has PM2 5. Purification function, and the efficiency shall be ≥ 99%;

10. The equipment has the function of mold purification, and the efficiency needs to be ≥ 99.9%;

11. It has the function of prompting filter replacement;

12. Equipped with copper and silver air sensing and detection devices;

13. Equipped with eight level air purification filter;

14. The power system of the equipment is equipped with energy supplement system, which can start automatically if the power is insufficient;

15. Air volume ≥ 1200m 3/ h；

16. The equipment is equipped with PLC intelligent control system, which has at least two-level control interface, standard RS485 communication and USB data export function. The air quality forms a digital or curve report function based on month, month and Sunday, and is automatically connected with the environmental area control to provide anti-corruption alarm data for the eight prevention management system;

17. Configure SMART File sensing nodes to realize data sharing, data connection and interconnection